Where Are Mizuno Golf Clubs Made?

Where Are Mizuno Golf Clubs Made?

Table of Contents

A lot of golfers believe that the location where the golf club is manufactured is a significant factor in the way it performs. While many golfers do not believe that there is any truth to this idea, however, some golfers believe that it’s true. If you’re a lover of Mizuno golf clubs, you are aware there are many great things to know about their performance benefits and how they impact your performance on the course.

If you’re interested in Mizuno’s golf clubs, perhaps you should learn the place where they’re made.

Where are Mizuno Irons, Wedges, Putters, & Hybrids Made?

Mizuno golf clubs are manufactured in Japan; however, they are made put together in the United States. For many golf businesses to compete in the market, creating everything inside the United States costs too much, this is true of many businesses across the manufacturing industry. There are both positives and negatives for businesses doing this, one major benefit of having the process close to home is that it is easier to control the processes and procedures that are in place, this will in turn lead to a higher quality end product.

If a club is created somewhere else and put together in the main location, it is easier to ship them prior to their construction, this can be a compromise between the two and it is a process that Mizuno does well. By doing this, damage and imperfections are minimized, and the clubs arrive at a higher standard.

The Mizuno factory is located in Braselton, Georgia, and there is a place where they complete all the assembly work for products like the Mizuno golf clubs as well as other Mizuno sporting goods.

Mizuno clubs have always been renowned for their premium manufacturing capabilities and capability to make wonderful golf clubs.

Part of this is due to the Japanese forging process that Mizuno irons undergo. To understand why Mizuno irons, feel different, it is important to understand why Mizuno irons’ feel and feel from others, it is helpful to understand what happens in the Japanese manufacturing process.

Let’s look at the process and what is involved.

What is the Mizuno Golf Club Creation Process?

This Japanese manufacturing process of forging makes these irons different from other irons on the market. However, based on the club you’re hitting, the method may vary a little. Here are a few procedures you’ll see during this Mizuno Forging Process.

1. Hot Air in Billet

  • The Mizuno irons are forged and start as a single rod made of steel.
  • The rods made of steel are cut into lengths of 10 inches to make them easier to work with.
  • The next step is to warm the billet to 1.200° Celsius.
  • The process of heating lets the tool be altered and then forged.
  • One of the most effective methods to comprehend how this process operates is to imagine an object of solid metal. If you examined the metal under a microscope, there’d be tiny holes in the metal.
  • What manufacturers of golf clubs attempt to achieve is it to have less room between irons of their irons.
  • There is less room between the two metals tend to mix better which results in an energizing experience when you make contact by the ball.
  • After the head is heated the steel billet is folded in order to create the rough outline of the area where the head and hosel will eventually form.

2. Forge Molding

  • After the billet has been bent, it’s ready to be put into the forging mold.
  • Forging is the place where the metal is created so that it is crushed together, creating a unique piece that has a distinct feeling.
  • To perform the Mizuno process, there’s a hammer press with a capacity of 1,000 tonnes pushed four times down the club head.
  • The hammer press is extremely heavy and can be used multiple times to ensure that the grain structure in the iron is formed.
  • The metal’s grains will bind together, which will help to stop air bubbles from forming, which can cause further problems when they occur.
  • The air bubbles that form will eventually be noticed by a good player, so it’s vital to stay clear of this at all.
  • Mold forging can be the most crucial element in developing the Mizuno iron.

3. Rough Trim

  • Then, the irons are cut roughly to fit the dimensions of the typical golf club.
  • The rough trim can cut off any extra metal that is not needed for iron used by the player.
  • The rough trim should not be the cut that is finalized on the club because it would not give golfers a smooth and smooth finish on their equipment.
  • This gives the developers an idea of what they can develop.
  • This is a little like using a cookie cutter while you bake.

4. Reheated

  • Some golf businesses may use only one forge; however, Mizuno can do this twice.
  • That means that once the golf clubs have been through the process of forging, they golf clubs will undergo another forging process.
  • Essentially, this results in a more pure experience when you play the clubs.
  • For it to be formed iron again, it must be put into the mold at a high temperature.
  • If the temperature isn’t high enough, steel isn’t bending correctly.
  • The second forging is where the golf club’s true shape occurs.
  • When the shape is set, Once you have it in place, you’ll begin recognizing it as a Mizuno golf club.
  • If there are extra pieces of steel left, these could be removed.

5. Shot Blasted

  • The final step of the forging process is known as shot blasting.
  • This helps clean the club before going through the stamping process.
  • The stamping is then applied, and the Mizuno logo and the Mizuno markings are placed on the clubhead the club then goes through its first of many checks.
  • In this stage, the head of the club is designed, and the club head is cast, but it is not finished. Mizuno golf club isn’t completed yet.
  • There’s an additional finishing process makes this clubhead more attractive for golfers.

What is the Mizuno Finishing Process?

  • After the club has been forged and the work isn’t completed.
  • Even though this is what allows players to achieve their incredible control as well as consistency don’t have that Mizuno appearance to their club that they will require.
  • The final process is equally important and involved as during the forging process.
  • If you didn’t, you’d probably not recognize the irons from Mizuno.

1. Make Room For the Club Shaft

  • You must make enough space in the hosel where the golf shaft will be.
  • As Mizuno’s heads get created, they are produced using the hose in every step of the production process.
  • Other golf brands, such as Miura will hold off until the end of the course and then attach to a hosel.
  • There are many ways to do this However, Mizuno considers it to be the most effective choice for them.
  • The hosel is then drilled to allow the shaft to go through, and an extremely rough grinding is made.
  • The rough grinding process can be used to set up the loft and lie on the iron golf.

2. Check Loft & Lie

  • You may have noticed the loft and the lay of the golf course are extremely important.
  • This is why a golf club must travel over a specific distance or perform on the course in the manner you would expect it to.
  • The lie and loft should be extremely precise, which is why it’s completed within a range that is 0.25 degrees.
  • The loft and the lie will be checked once more during this procedure to make sure there isn’t any change at all.

3. After the Barrel Process

After the loft and lie are established, the clubhead undergoes the process that Mizuno calls “the After Barrel Process”.

This is a way of saying this means the head of your golf club is immersed in the water, surrounded by thousands of tiny stones.

The stones begin to smooth and cleanse the head of the club to ensure it appears great.

This process can take a while, and most clubheads are submerged for about two hours or more in Mizuno. Mizuno factory.

4. Grooved & Face Milled

  • Then, the clubface is milled, and the grooves are etched.
  • As you can see that some aspects of the Mizuno procedure are carried out by hand, while other parts require the use of an automated machine.
  • The custom engraving and the cutting of the grooves are accomplished using a laser.
  • This ensures precision.
  • Because this is carried out this late in the process, the process could cost you a lot of money in the event of a mistake being made.
  • The lasers are accurate and perform a fantastic job of ensuring that the club adheres by USGA standards in place.

5. Polishing & Painting

  • The golf clubs undergo an exfoliation process in which they go through a machine that smooths away any imperfections.
  • When you polish the device, you will find many different buffing cloths that can help ensure that the polish comes out perfectly.
  • After the clubs are cleaned, there are 11 possible colors in which the clubhead could be painted in.
  • The traditional color is indeed the one you’ll encounter most often, however, Mizuno offers a variety of customized color combinations on a few of their golf clubs.
  • The head is then fitted with a shaft fitted, and a new grip is fitted.
  • This is the process when both the loft as well as the angle of the club are examined once more.
  • Mizuno is determined to make sure that there is no change since they’ve finished the head of their golf club.
  • If any adjustments have been made, now is the best time to make them.
  • The quality assurance standards for Mizuno are excellent.

Conclusion

  • Perhaps, now you are more educated about the procedure Mizuno golf clubs undergo when they are built.
  • We are awestruck by everything that this process can provide and the potential to create stunning and top-quality clubs made available to the public.
  • A major thing Mizuno is renowned as is their ability to help clubs to feel amazing.
  • It is evident that the Japanese forging process definitely makes a an impact on golfers who want the sameness and efficiency when they swing.
  • If you’re in search of new golf clubs this year, you should take a look at this brand. Mizuno brand.
  • There is a good chance that there’s an option that will work perfectly for your particular game.

 

Some Commonly Ask Mizuno Questions

Are Mizuno Golf Clubs Made in China?

The golf clubs produced by Mizuno are made in the United States rather than in Japan. The reason for this is Mizuno’s Japanese forging process employed by Mizuno irons.

Where Does Mizuno Make Their Golf Clubs?

Most development remains in the Osaka Head Office, Japan however, some of the work is completed in Atlanta. There the most important decision-making is made, including deciding the world’s top golf course to deciding on the best number to assign to the most recent prototype model, which will affect the future of Mizuno golf.

Who Founded Mizuno?

Established in 1906 by Rihachi Mizuno founded in 1906, founded in 1906 by Rihachi Mizuno, Japanese sporting equipment business, Mizuno Corporation (TYO: 8022) is located in Osaka.

Where Are Mizuno Clubs Manufactured?

It is located in Braselton, Georgia, that the Mizuno factory manufactures all the golf clubs as well as other sporting products that are offered through the firm. High-end manufacturing and the ability to create an item that is excellent to play have been the hallmarks of Mizuno.

How Can You Tell If You Have a Fake Mizuno?

Bending clubs is a great method to check them. Mizuno clubs are made of forged iron so they can bend easily. If cast iron has been used then they will not bend and are likely faked.

DESCRIBING MIZUNO’S SHIPMENT FROM?

Custom-designed equipment is manufactured by Mizuno is industry standards. Mizuno set up their own custom production line at Braselton, Georgia, to mimic the similar working procedures that were used in their original facility situated in Yoro, Japan, which was founded in 2005.

What Products Do Mizuno Make Other Than Golf Clubs?

As a global company, Mizuno makes a wide selection of sports equipment and sportswear, such as golf, tennis, baseball, football, volleyball, running as well as skiing, rugby and cycling, table tennis, judo boxing, badminton, and athletic equipment.

What Did Mizuno First Create?

From in 1933 Mizuno started manufacturing equipment for golf. Its first product is its Starline line. In 1934, the company opened a factory in Osaka, Japan, to make baseball bats, baseball uniforms, and balls, along with golf clubs and skis.

Do Any Professional Golfers Use Mizuno?

Mizuno is proud to say that its equipment is admired and used by professional players worldwide. Many of them have no contract to play with the equipment. Because of our history of touring, we’ve had many significant winners and world-class performers who were players with Mizuno when they were growing and rising.

Get in Touch

Please complete the following fields: to schedule a fitting, reserve a bay, or inquire about any of our repair services and someone will contact you within the next 4-24 hours.

(Select any services that you're interested in learning more about.)

Latest Posts

Related Posts

Club Fitting Advice

Playlist

33 Videos